We offer a bespoke fitting service at our Tunbridge Wells address if you are in doubt as to the suitability of snowchains for your vehicle.

FITTING INSTRUCTIONS*

Details below refer to Passenger Car and 4 x4 Applications

	1. Pass the cable behind the wheel, so that the two open ends are in front of the tyre.		2. Lift the cable up the tyre to the top of the wheel rim and secure.
	3. Fasten the hook on to any link of the short chain, then push the cable behind the wheel and adjust the chain to fit.		4. Insert the tension chain into the locking gear and pull to adjust. Attach hook on end of rubber tongue onto tyre side wall chain. For manually tensioned chains you will need to stop and re-tension chains after 200m.
	Reverse of Wheel	*These are simplified general fitting instructions.(do not apply to the K-Summit ranges) Comprehensive instructions are provided with all snowchains